Making Everything
Perfect on roof

EzQuik

Metal Roof Solutions

‘L’ bracket is suitable for metal roofs on which screw penetration is allowed. Care needs to be taken in preventing water leakage when installing.

For non-drilling metal roof solutions, all parts of the mounting system are obtained through laboratory tests and related to Safety certification.

L Bracket

The L bracket is suitable for all metal roofing installed with screws, and special attention should be paid to prevent water leakage after installation.


L Bracket with TB-1 & EzBase

This special assembly is designed for corrugated roof sheet or square rib roofing profiles. The arc sealing rubber is shaped consistent with the shape of the roof profile for exceptional water tightness. TB-1 or EzBase connects to the roof structure with 2 x 14g-65  screws that allow for larger bracket spacing.


KLC406, KLC700 & GRS700

 

KLC406 is specially designed for Klip Lok 406 metal sheets. The clamp can be used with a variety of EzQuik brackets, such as L feet, EzTKT and EzTruss, etc. 

There are two types of Klip Lok 700 metal sheet, namely kliplok700 Classical and Hi-strength, which have different section profiles. KLC700 corresponds to Klip Lok 700 Hi-Strength metal sheet, and GRS700 corresponds to Klip Lok 700 Classical. 

KLC series clamps have excellent structural stability and have passed the laboratory 1:1 full load test.

EzQuikTM  Bracket Spacing for Different Metal Roofing

L Bracket Spacing

Roof Height (m)Region A (mm)Region B (mm)
512801280
1012001200
1511001100

L Bracket with TB-1 or EzBase Spacing

Roof Height (m)Region A (mm)Region B (mm)
521351050
101340980
151300920

KLC406 Spacing

Roof Height (m)Region A (mm)Region B (mm)
51015930
101015700
15815700

KLC700 & GRS700 Spacing

Roof Height (m)Region A (mm)Region B (mm)
5950700
10950700
15700500

How to identify the type of metal sheet for klip lok?

Important:

No universal clamp can be used, as there is a risk of damaging the roof

Lysaght Klip-Lok 406®

  • The sheet Nominal cover width: 406mm
  • The spacing of the rib is about 203mm.
  • There is 2 parallel lines pattern.
  • Ideal working with KLC406

Klip-Lok CLASSIC® 700

  • The sheet Nominal cover width: 700mm。
  • The spacing of the rib is about 233mm.
  • There is 2 parallel lines pattern.
  • Ideal working with GRS700

Klip-Lok 700 HI-STRENGTH®

  • The sheet Nominal cover width: 700mm.
  • The spacing of the rib is about 233mm.
  • There is multiple vertical lines pattern.
  • Ideal working with KLC700