The Studio of Component
EzQuik Rail
The rail is designed to have the most optimal structural performance compared to the others. This is achieved by having a box section with a large section height.
- Aluminum extrusion profile, 6063-T6 alloy
- Natural anodized/ Black anodized
- Section height: 62mm
- Standard length: 4.4m, 4.2m
End clamp & Mid Clamp
The end clamps have varieties for adopting different PV panel thicknesses.
The Mid clamps are bundled with factory pre-assembled earthing chips for simultaneous panel and earthing installation.
All clamps are designed to be used with EzT-Bolt for fastening.
- Aluminum extrusion profile, 6063-T6 alloy
- Natural anodized/ Black anodized
- Thickness specification: 30, 32, 35, 40, 46 and 50mm
Earthing Lug
Earthing lug is used to connect earth cable with EzRail.
There are 2 varieties available:
- Earthing lug-02 (simpler and more economical)
- Earthing lug-03 (more specific requirement)
Both types comply with the Australian Standards.
- M6 Stainless steel EzT-bolt and Copper Lug6-48
- Copper Lug 6-28 available
- Aluminum module chrome plating
- M8 Stainless steel EzT-Bolt and Copper Lug8-48
Splice
The splicer is simple to use and reliable due to the special design of the rail.
The splicer uses 2 EzT-bolts for joining rails. EzT-bolts allow the earthing circuit to work well.
All clamps are designed to be used with EzT-Bolt for fastening.
- Aluminum extrusion profile, 6063-T6 alloy
- Natural anodized/ Black anodized
Ez-Tbolt & Screws
EzT-Bolt is designed to meet Australian standards and is made of stainless steel with a special coating for galling resisting.
Each bolt has an indicator that is convenient for confirming the correct ‘T head’ positioning and ensure safety and reliability.
The screw is the most important part of the mounting system. The connection with the roof uses a 14g-65 or 14g-75 screw.
The screws comply with the Australian building code
- Stainless steel for Ez-Tblot
- Carbon steel with galvanize for Screws
Kliplok Clamp
Klip Lok clamp is a solution for installing PV panels on non-drill metal roofs. The clamps can work with all of the EzQuik brackets, such as EzTKT, EzTruss, EzBase, and L feet, etc.
The clamps support Lysaght Kliplok metal sheet or their compatible products.
KLC700 for Lysaght KLIP-LOK 700 HI-STRENGTH®
GRS700 for Lysaght KLIP-LOK 700 CLASSIC®
KLC406 for Lysaght KLIP-LOK®406
Please confirm the type of the metal sheet before installing. If it does not work, please contact MSE for assistance.
- Aluminum extrusion profile
- 6063-T6,
- Clear or Black anodized.
- Rubber available
L feet
L feet are widely used in the roof structural connection of mounting systems and metal sheet roofs. The connection with the roof uses a 14g-65 or 14g-75 screw.
- Aluminum extrusion profile
- 6063-T6
- Clear or Black anodized.
- Sealing rubber gasket available
L feet 85
It is a bracket that can be easily combined with EzQuik components， such as KLC，TB-1 and EzBase etc.
The connection with EzRail uses an Ez-Tbolt.
The screws comply with the Australian building code
- Aluminum extrusion profile
- 6063-T6
- Clear or Black anodized.
- Ez-Tbolt available
Tile Hook
MSE provides a variety of styles and specifications of stainless steel roof feet to meet different needs.
- 304 Stainless steel
- 6063-T6
- Clear or Black anodized.
- Arm length: 100mm or 126mm
EzTKT
EzTKT is a tilt system designed for flat roofs.
A popular one is EzTKT1530 with an adjustable leg to obtain installation inclination from 15 degrees to 30 degrees. more…
As an option for special needs, EzTKT3060 also provides 30 degrees to 60 degrees adjustable. more…
EzTKT10 is a fixed tilt leg, which is a good solution for the commercial flat roof. The fixed-tilt leg can make the spacing of rows smaller than the one of EzTKT1530. more…
- Aluminum extrusion profile
- 6063-T6
- Clear or Black anodized.
EzTruss
This is a PV panel roof truss system. The frame composed of the truss system is stable and reliable. It can be combined with other accessories such as TB-1, EzKLC, and EzBase.
EzTruss also provides 15 degrees to 30 degrees adjustable.
- Aluminum extrusion profile
- 6063-T6
- Clear or Black anodized
TB-1 is designed for corrugated roof sheet profiles. The arc sealing rubber is shaped consistent with the shape of the roof profile for exceptional water tightness. TB-1 connects to the roof structure with 2 x 14g-65 screws that allow for larger bracket spacing. for more…
- Aluminum extrusion profile
- 6063-T6
- Clear or Black anodized
- Rubber available
EzBase and TB-1
Ezbase is a component that can work with most brackets such as L feet, EzTKT and EzTruss. It is suitable for most metal roofing sheets. Ezbase connects to the roof structure with 2 x 14g-65 screws that allow for larger bracket spacing.
- Carbon steel
- Q235 (ASTM A36)
- Galvanize
- Length: 200, 300
- EzNut available
Ground Truss
This is a PV panel ground truss system. The frame is made of galvanized steel. There are a variety of footing options according to the site conditions.
- Carbon steel
- Q235 (ASTM A36)
- Galvanize
Ground Foot (GPSF)
The foot, GPSF, use two M12 Dyna-bolt to fix on the concrete ground.
Use two M12 bolts to connect to the ground truss.
- Carbon steel
- Q235 (ASTM A36)
- Galvanize
Post Anchor (GPSA)
GPSF is a concrete buried foot anchor that meets Australian building standards.
Use two M12 bolts to connect to the ground truss.
- Carbon steel
- Q235 (ASTM A36)
- Galvanize
